 PROIZCOMPAVTO (Fergana, Uzbekistan), an authorized AdAstra's system integrator, has been successfully implementing SCADA/HMI & SOFTLOGIC-system TRACE MODE in process control systems at Uzbekistan enterprises producing cement, roofing slate, glass, glassware for more than 5 years.
PROIZCOMPAVTO's solutions are known for their economic efficiency (about $150 per a single input/output), effectiveness and high reliability, which has been verified by many well-known Uzbekistan industrial enterprises.
QUARTZ Plant (Kuvasai, Uzbekistan) is the main glassware manufacturer in the Central Asia. A reconstruction of the glass-making shop has been performed jointly with TEKIN company (Italy). This shop  provides the architectural, automobile and hardened glass with the thickness of 2 - 10 mm. PROIZCOMPAVTO's engineers have implemented SCADA TRACE MODE in the control systems for glassware production, refractory brick production shops, in the control systems for the atmospheric protection station and the compressor shop.
SCADA/HMI TRACE MODE is also successful in controlling the production processes at KYZYLKUMCEMENT Plant (Navoyi) where the process control systems have been developed for:
- 15 schenck metering devices for charging raw material mills,
- 8 raw materials mills, flour preparation for clinker burning furnaces,
- 3 rotating cement clinker burning furnaces,
- spiration process control systems, etc.
In KUVASAICEMENT Plant (Kuvasai), SCADA/HMI TRACE MODE has been successfully operated in process control systems for 4 rotating clinker burning furnaces, 3 asbestos and cement metering devices for roofing slate production.
TRACE MODE has also been implemented in process control systems for clinker grinding mills at AKHANGARANCEMENT Plant (Akhangaran) and BEKABADCEMENT Plant (Beabad).
SCADA TRACE MODE is widely used in the production of building materials. The system is effectively operated at such enterprises as Glavmosstroy-Beton, Nevyanskiy Cementnik, Novorosscement, 9th January Glass-making factory and at many other enterprises. |
On 24 April, 2006 AdAstrA Research Group has opened the Beijing Representative office. The office will focus on technical support for Chinese users of TRACE MODE SCADA software and will co-ordinate building of the Chinese national network of system integrators and dealers. Special attention will be given to the close OEM co-operation with Chinese instrumentation companies. 
ZAO PIK ZEBRA (Moscow, Russia) the AdAstrA's system partner has completed development and successfully implemented control system for the power unit 1 (800 MWt) at Talimardjan heat power plant (Uzbekistan). The control system is based on KRUIZ DCS and SOFTLOGIC and HMI software TRACE MODE.
Baoshan Iron & Steel Plant is the biggest metal plant in China. In January 2004, a SCADA/HMI and softlogic process control system for air and oil supply to the rolling mill was successfully launched in the steel-rolling shop of Plant No. 3. The system has been developed by engineers of 
Advantech Corporation (Taiwan) has presented the Advantech eBuilding Automation System, the control system for its own office building in Beijing based on the Russian 
Elna Company, the AdAstra's authorized system integrator, has developed a new serial project: the process control system for low-capacity gas-turbine power plants up to 12 MW.
The Silian corporation, one of the main AdAstrA's OEM-partners in China, has completed the development of DCS-system at the Yong Xin Sugar factory in the Guang Xi province (China).